In stock
Original price was: £131.99.£124.99Current price is: £124.99.
Lift and support with confidence using this 3 ton low‑profile trolley jack and 3 ton folding axle stand kit. Smooth, strong performance makes vehicle maintenance safe, stable and stress‑free every time.
In stock
Our RocwooD RWTJ3.0 low profile Trolley Jack is the perfect accessory to help you change a tyre or sort issues under your car/van. This Trolley Jack provides safe and easy car/van lifting with a capacity to lift up to three tonnes. Suitable for most cars/vans. It features an automatic safety overload valve. Manufactured from heavy duty steel with a durable welded construction to provide a long lasting service life. This low profile trolley jack is a fantastic product to get under those low to the ground heavy cars, it is easy to take up and down too. You can lift any vehicle up to three tonnes with ease.
Equipped with rear rotating castors for easy, control and manoeuvre ability. Built-in one piece hydraulic unit with dual pump-through action designed to prevent the handle locking at Maximum ram extension. 75mm to 505mm height range.
IMPORTANT –
Tilting the jack during shipping allows air to enter the cylinders. As a result, when you first pull a new jack out of the box, it’s critical to bleed out the air before using it.
Additionally, it would be best to repeat this practice monthly or whenever you notice any lapses in lifting capacity. Bleeding the jack every month will help your jack perform at its best. To bleed your lift, follow the steps below:
With the valve open, pump ten times.
Close the valve and elevate it to the full height.
Continue to pump ten times while at full extension.
Lower the cylinder by releasing the valve.
If required, repeat two more times to expel all air from the cylinder.
Most of the time, this will completely bleed the jack. If not, gently unscrew the oil filler plug on the side after the cylinder has been freed and lowered to help remove any trapped air.
A Pair of RocwooD RWFAS3 folding axle stands maintains some space in your garage by folding away neatly for easy storage in a draw or cupboard. With a 3 tonne max rating (1500kg each) they offer all the adjustability and features of regular stands. Conforms to TUV/GS safety standards.
An axle stand supports cars and other vehicles lifted off the ground to access the underside. Mechanics use hydraulic jacks to raise them for maintenance or repairs, such as changing oil or fixing an exhaust pipe. Axle stands are made from hardwearing, load-bearing metals like aluminum, steel, or cast iron that can withstand the weight of a car without slipping, breaking, or twisting.
Axle stands are more robust than jacks because they do not contain hydraulic or mechanical parts which can wear out over time. They are also less prone to shifting position under stress, movement which could cause the vehicle to fall.
When using axle stands, it is important to ensure that they are suitable for the vehicle you will be supporting and will be able to support its full weight. It is also important to place chocks (wheel wedges) beneath the wheels opposite the end of the car you are raising – i.e. beneath the front wheels if you are raising the back of the vehicle, and against the back wheels if you are raising the front. Safety is always an important consideration but especially so when fatal accidents are a possibility.
Trolley Jack Carton Dimensions – L 80 x W 21.5 x H 18cm
Trolley Jack Carton Weight – 33.4 kg
Axle Stand Carton Dimensions – L 14 x W 14 x H 31cm
Axle Stand Carton Weight – 4kg
Click the link to access the Google Drive of all RocwooD Declarations of Conformity: Click Here
(This is a work in progress)
Kevin P. (verified owner) –