Our RocwooD RWTJ2.0 Trolley Jack is the perfect accessory to help you change a tyre and sort issues under your car. Handily compact and paired with a integrated carry handle, this is ideal for keeping in the garage or boot of your car. This Trolley Jack provides safe and easy car lifting with a capacity to lift up to two tonnes. Suitable for most cars with a automatic safety overload valve. Manufactured from heavy duty steel with a durable weld construction providing a long lasting service life.

Equipped with rear rotating castors for easy, control and manoeuvre ability. Built-in one piece hydraulic unit with pump-through action designed to prevent the handle locking at Maximum ram extension. 135mm to 325mm height range which is an incredible range.

IMPORTANT –

Tilting the jack during shipping can allow air to enter the cylinders. As a result, when you first pull a new jack out of the box, it’s critical to bleed out the air before using it.

Additionally, it would be best to repeat this practice monthly or whenever you notice any lapses in lifting capacity. Bleeding the jack every month will help your jack perform at its best. To bleed your lift, follow the steps below:

With the valve open, pump ten times.

Close the valve and elevate it to the full height.

Continue to pump ten times while at full extension.

Lower the cylinder by releasing the valve.

If required, repeat two more times to expel all air from the cylinder.

Most of the time, this will completely bleed the jack. If not, gently unscrew the oil filler plug on the side after the cylinder has been freed and lowered to help remove any trapped air.

An axle stand supports cars and other vehicles lifted off the ground to access the underside. Mechanics use hydraulic jacks to raise them for maintenance or repairs, such as changing oil or fixing an exhaust pipe. Axle stands are made from hardwearing, load-bearing metals like aluminum, steel, or cast iron that can withstand the weight of a car without slipping, breaking, or twisting. They are a simple, strong and functional design.

Axle stands are more robust than jacks because they do not contain hydraulic or mechanical parts which can wear out over time. They are also less prone to shifting position under stress, movement which could cause the vehicle to fall.

When using axle stands, it is important to ensure that they are suitable for the vehicle you will be supporting and will be able to support its full weight. It is also important to place chocks (wheel wedges) beneath the wheels opposite the end of the car you are raising – i.e. beneath the front wheels if you are raising the back of the vehicle, and against the back wheels if you are raising the front. Safety is always an important consideration but especially so when fatal accidents are a possibility. It features ratchet adjustable for quick, easy height adjustment and easy of lowering the car.

Our axle stands have high quality, strength, and a load capacity of up to 3 tons each. Perfect for most automotive maintenance and repair jobs.

Trolley Jack Carton Dimensions – L 46.5 x W 20.5 x H 14cm

Trolley Jack Carton Weight  – 6.9kg

Axle Stand Carton Dimensions – L 22 x W 20 x H 33cm

Axle Stand Carton Weight – 6kg

• 1x RWTJ2.0 Trolley Jack
• 1x Yellow Handle
• 2x RWAS3 Axle Stands

RWTJ2.0 Manual

RWAS3 Manual

Click the link to access the Google Drive of all RocwooD Declorations of Conformity: Click Here

(This is a work in progress)